manualshive.com logo in svg

Honeywell Thor VM3, User Manual, Page: 130 / 378

Share
Download
Honeywell Thor VM3 User Manual Download Page 130

118

Thor VM3 with Microsoft Windows Embedded Compact 7 User Guide

Install Remote Antenna

Remote antennas are available for the 802.11 WLAN radio, the WWAN radio and the 
GPS.

802.11 Remote Mount Antenna

Components and Mounting Diagram

The Remote Antenna Installation Kit consists of two 
brackets (base plate and right angle), cable, and 
antenna. Tools are not included.
The desired remote antenna bracket is mounted on 
the top of a forklift, truck or other vehicle and cabled to 
the Thor VM3 inside the vehicle.
The Vehicle Remote Mount Antenna cannot be used 
by devices with an internal antenna.

Nut

Washer

Washer

Bracket

To antenna

To antenna connector on computer

Bracket

To antenna

Antenna

Summary of Contents for Thor VM3



























































































































































































































































































































































































Reviews:

No comments