Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
329
The Thor VM2 should be authenticating the server certificate and using EAP-TLS for
the user authentication.
Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU
Main tab shows the device is associated after the radio connects to the network.
for information on generating a Root CA certificate or a User certificate.
Note:
The date must be properly set on the device to authenticate a certificate.
WPA PSK
To connect using WPA/PSK, make sure the following profile options are used:
4. Enter the SSID of the Access Point assigned to this profile
5. Set EAP Type to None
6. Set Encryption to WPA PSK or WPA2 PSK
7. Set Auth Type to Open
Click the WEP keys/PSKs button.
This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and
click OK.
Once configured, click the Commit button.
Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU
Main tab shows the device is associated after the radio connects to the network.
Summary of Contents for Thor VM2
