Honeywell Thor VM2, User Manual, Page: 322 / 398

310 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
• Start Ping – Start a continuous ping to the IP address specified in the text box to the
right of this button. Once the button is clicked, the ping begins and the button label
changes to Stop Ping. Clicking the button ends the ping. The ping also ends when
any other button on this screen is clicked or the user browses away from the Diags
tab. The results of the ping are displayed in the Diagnostic Output box.
• Diagnostics – Also attempts to (re)connect to the wireless LAN. However, this option
provides more data in the Diagnostic Output box than the (Re)connect option. This
data dump includes radio state, profile settings, global settings, and a list of
broadcast SSID APs.
• Save To… – Use this to save the results of the diagnostics to a text file. Use the
explorer window to specify the name and location for the diagnostic file. The text file
can viewed using an application such as WordPad.
Global
Start > Programs > Summit > Global tab
The parameters on this panel can only be changed when a logged in with the admin
password. The current values for the parameters can be viewed by the general user
without requiring a password.
Note: Tap the Commit button to save changes. If the panel is exited before tapping the Commit
button, changes are not saved!
Factory Default Settings
Roam Trigger -65 dBm
Roam Delta 5 dBm
Roam Period 10 sec.
BG Channel Set Full
DFS Channels Off
DFS Scan Time 120 ms.
Ad Hoc Channel 1
Aggressive Scan On
CCX Features ABG: Optimized
WMM Off
Auth Server Type 1
TTLS Inner
Method Auto-EAP
PMK Caching Standard
WAPI Off (dimmed)
TX Diversity On
RX Diversity On Start on Main
Frag Threshold 2346
RTS Threshold 2347
LED Off