244
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
4. There are two Unicode text boxes located on the lower part of this tab. Enter the
Unicode value in the left text box and the Unicode character is displayed in the right
text box.
5. Click OK to save the result and close the control panel.
Remap a Key to a Key Sequence
Up to 16 keys may be specified for the key sequence. The sequence can consist of keys
and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Key Sequence from the Remapped Key pull-down list.
4. Select the first key for the multiple key sequence from the pull-down list.
5. Press the Add button to add the key to the multiple key sequence shown in the Key
Sequence box.
6. Repeat this steps 4 and 5 until all desired keys have been added to the key
sequence. If necessary, use the ton to erase all entries in the Key Sequence box.
7. Click OK to save the result and close the control panel.
Remap a Key to a Sequence of Unicode Values
Up to 16 Unicode values may be specified for the key sequence. The sequence can con-
sist of keys and Unicode values.
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Key Sequence from the Remapped Key pull-down list.
4. Select Unicode from the Key Sequence pull-down list.
5. There are two Unicode text boxes located on the lower part of this tab. Enter the
Unicode value in the left text box and the Unicode character is displayed in the right
text box.
6. Press the Add button to add the key to the multiple key sequence shown in the Key
Sequence box.
7. Repeat this steps 4 through 7 until all desired characters have been added to the key
sequence. If necessary, use the ton to erase all entries in the Key Sequence box.
8. Click OK to save the result and close the control panel.
Remap a Key to a Special Function
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select the special function from the remapped key from the Remapped Key pull-
down list. Special functions that can be assigned are:
Summary of Contents for Thor VM2
