Honeywell Thor VM2, User Manual

Page: 237 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 225
Command
Options
Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size
do the following:
1. Select load from the Commands list and click the Run cmd button.
2. Select stop from the Commands list and click the Run cmd button.
3. Select options from the Commands list, enter the new packet size in the Options list
and click the Run cmd button.
NDISLog
NDISLog creates a .TXT file that can be viewed with any text editor program that sup-
ports .TXT files.
Command Function
options Specifies the option to perform. See the table below for the option parameters and
values.
load Loads and starts Netlog.
start Starts the Netlog process of logging the network traffic.
stop Stops Netlog from logging network traffic.
unload Unloads Netlog.
Options Function
pkt_size
in bytes Specifies the maximum packet size captured in bytes. This option should only be run after you
have called
load and stop . Default is 5000.
cap_size
in bytes Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only
be run after you have called
load and stop . Default is 500,000.
.cap file Specifies the name of the file to which network traffic information is saved. This option should
only be run after you have called
load and stop . Default is \netlog.