Honeywell Thor VM2, User Manual

Page: 189 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 177
Options
About
Option Function
Report when
connection lost This option is Enabled (checked) by default.
There may be an audio or visual signal when a connection between a paired, active device is lost.
A visual signal may be a dialog box placed on the display notifying the user the connection between
one (or all) of the paired Bluetooth devices has stopped. Tap the OK button to remove the dialog box
from the screen.
Report when
reconnected This option is Disabled (unchecked) by default.
There may be an audio or visual signal when a connection between a paired, active device is made.
A visual signal may be a dialog box placed on the display notifying the user the connection between
one (or all) of the paired Bluetooth devices has resumed. Tap the OK button to remove the dialog box
from the screen.
Report failure to
reconnect This option is Enabled (checked) by default.
The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired, active device fails to re-
connect. A visual signal may be a dialog box placed on the display notifying the user the connection
between one (or all) of the previously paired Bluetooth devices has failed.
Tap the X button or OK button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting; attempted to pair
with a device that is currently paired with another device; attempted to pair with a known device that
moved out of range or was turned off; attempted to pair with a known device but the reason why
reconnect failed is unknown.
Clear Pairing Table on
Boot This option is Disabled (unchecked) by default.
When enabled (checked), all previous paired information is deleted upon any reboot sequence and no
devices are reconnected.
When enabled (checked) “Auto Reconnect on Boot” is automatically disabled (dimmed).
Auto Reconnect on
Boot This option is Enabled (checked) by default. All previously paired devices are reconnected upon any
reboot sequence.
When disabled (unchecked), no devices are reconnected upon any reboot sequence.
Auto Reconnect This option is Enabled (checked) by default. This option controls the overall mobile Bluetooth device
reconnect behavior.
• When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is automatically disabled
and dimmed.
• When Auto Reconnect is disabled (unchecked), no devices are reconnected in any situation. The
status of Auto Reconnect on Boot is ignored and no devices are reconnected on boot. The status
of Clear Pairing Table on Boot controls whether the pairing table is populated on boot.
• When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is disabled (unchecked),
devices are not reconnected on boot, but are reconnected in other situations (example: return from
out-of-range).
• When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is enabled (checked),
devices are not reconnected on boot, but are reconnected in other situations (example: return from
out-of-range). The pairing table is cleared on boot. The status of Auto Reconnect on Boot is
ignored and the option is automatically disabled (unchecked) and dimmed.