manualshive.com logo in svg

Honeywell Thor VM2, User Manual, Page: 18 / 398

Share
Download
Honeywell Thor VM2 User Manual Download Page 18

6

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

About this Guide

This user’s guide has been developed for a Thor VM2 with a Microsoft

®

 Windows

® 

Embedded CE 6 operating system.

Out of the Box

The following items may be packaged separately:

•

Thor VM2

•

Standard or Enhanced Dock (includes 10-60VDC power cable)

•

RAM or U-Bracket vehicle mount kit

If you ordered additional accessories for the Thor VM2, verify they are also included with 
the order. Keep the original packaging material in the event the Thor VM2 should need 
to be returned for service. For details, see 

Product Service and Repair

.

P3

P8

P4

P9

P5

P10

P6

P2

P7

P1

SYS

SSD

Wi

Fi

UPS

THOR

VM2

Summary of Contents for Thor VM2















































































































































































































































































































































































































Reviews:

No comments