Honeywell THOR VM1 Reference Manual Download Page 294

Page: 294 / 324

Certificates

Note:

Please refer to the Security Primer to prepare the Authentication Server and Access Point for

communication.

Note:

It is important that all dates are correct on the Thor VM1 and host computers when using any type of

certificate. Certificates are date sensitive and if the date is not correct authentication will fail.

Quick Start

Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.

Generate a Root CA Certificate

and download it to a PC.

2. Connect the Thor VM1 to the desktop PC using ActiveSync and copy the certificate to the Thor VM1 \System folder.

Install the Root CA Certificate

User Certificates are necessary for EAP-TLS

Generate a User Certificate and Private Key file

and download it to a PC.

2. Connect the Thor VM1 to the desktop PC using ActiveSync and copy the certificate and private key file to the Thor VM1

\System folder.

Install the User Certificate and Private Key file

4. After installation, perform a Suspend/Resume.

Verify installation

6-38

Summary of Contents for THOR VM1





































































































































































































































































































































Search results

Summary of Contents for THOR VM1

Reviews:

Honeywell THOR VM1, Reference Manual, Page: 294 / 324

Search results

Summary of Contents for THOR VM1

Reviews: