Honeywell THOR VM1, Reference Manual, Page: 185 / 324

RunCmd Tab
The default for all text boxes is Empty, Null or " ". The text boxes accept string values only.
Note that executables and parameters are not checked for accuracy by the keyboard driver. If the launch fails, the Thor VM1
emits a single beep, if the launch is successful, the mobile device is silent.
The Run Cmd command is defined for use by system administrators. These instructions call the ShellExecuteEx API, which
opens documents directly.
1. Place the cursor in the text box next to the Cmd you wish to run, e.g. Cmd1, Cmd2.
2. Enable the file radio button and enter the name of the file.
3. Enable the PARM radio button to add parameters for file/exe execution in the same text box.
Tap the OK button when finished. The changes take effect immediately.
3-123