Home
/
Honeywell
/
THOR VM1
/
Reference Manual

Honeywell THOR VM1, Reference Manual, Page: 140 / 324

Share

Page: 140 / 324

Honeywell THOR VM1 Reference Manual Download Page 140

Main Tab

Start > Settings > Control Panel > Data Collection > Main tab

The parameters shown on these panels are only those that apply to the specific mobile device.

Parameter

Function

Device 1,2,3

1 - Default is Disabled

2 - Default is Disabled

3 - Default is Disabled

The data collection

device

(laser scanner, laser imager, external, or wireless).

Send Key Messages
(WEDGE)

Default: Enabled.

When Send Key Messages (WEDGE) is checked any data collection scan is converted to
keystrokes and sent to the active window. When this checkbox is not checked, the application will
need to use the set of Scanner APIs to retrieve the data from the scanner driver. Note that this latter
method is significantly faster than using Wedge.

3-78

«
...
138
139
140
141
142
...
»

Summary of Contents for THOR VM1





































































































































































































































































































































Reviews:

No comments