Honeywell THOR VM1, Reference Manual, Page: 137 / 324

Bar Code Readers
The Thor VM1 can use the following external bar code readers:
l
Tethered hand-held scanners are tethered to a serial port on the Thor VM1 and are configured by scanning the engine-
specific bar codes in the scanner manufacturer's programming guide. The manufacturer's guides are usually shipped
with the bar code reader.
l
Wireless hand-held Bluetooth scanners are configured by scanning the engine-specific bar codes in the scanner
manufacturer's programming guide. The manufacturer's guides are usually shipped with the bar code reader.
l
The body worn Bluetooth Ring Scanner module may be using a Symbol 4400 Ring Imager or a Symbol 955 Ring
Scanner. The BTRS module is configured by scanning the bar codes in the Bluetooth Ring Scanner Guide.
Return to Factory Default Settings
After scanning the engine-specific bar code to return the scanner/imager to factory default settings, the next step is to open the
bar code wedge panel on the mobile device collecting the scanned data. Click the OK button to close the panel. This action will
synchronize all scanner formats for your device.
3-75