background image

INSTALLATION INSTRUCTIONS

Place Bar Code Here

62-2018-05

TB7300 Series Communicating 

Fan 

Coil Thermostats

24 VAC/FOR COMMERCIAL AND LODGING HVAC 

APPLICATIONS

APPLICATION

The TB7300 PI thermostat family is specifically designed for 

fan coil control. The TB7300 Series are communicating 

thermostats with models available in BACnet® MS/TP and 

ZigBee® wireless mesh protocols and can be easily 

integrated into a WEBs-AX building automation system based 

on the NiagaraAX® platform.

Thermostats equipped with an occupancy sensor cover 

provide advanced active occupancy logic, which will 

automatically switch occupancy levels from Occupied to 

Stand-By and Unoccupied as required by local activity being 

present or not. This advanced occupancy functionality 

provides advantageous energy savings during occupied 

hours without sacrificing occupant comfort. All thermostats 

are PIR ready and can be ordered with or without Honeywell 

occupancy sensor. The occupancy sensor cover is available 

to order separately if a PIR is needed at a later time.

FEATURES

• Available in BACnet MS/TP and Zigbee wireless protocols
• Backlit LCD display with dedicated function menu keys for simple operation
• Internal humidity sensing for increased occupant comfort through dehumidification on some models

• Fully integrated advanced occupancy functionality with a PIR cover provides energy savings opportunity on 

select models; all other models are PIR ready and can have an optional occupancy sensor cover added

• Configurable sequences of operation
• Configurable fan button allows thermostat to meet more applications with a single model
• Password protection to minimize parameter tampering
• Six levels of keypad lockout to limit access to change user parameters such as setpoints, system mode, etc.
• Auto Fan speed mode increases occupant comfort in cooling mode by reducing humidity and reduces fan 

noise

• Available for 24 Vac on/off, floating or analog control meets advanced applications requirements
• Three inputs for monitoring and other advanced functions

• SPST auxiliary output that can be used for lighting or auxiliary reheat
• All wiring connections are made to removable terminal blocks simplifying installation

TB7300 Series 

Commercial 

Thermostat

TB7300 Series Hotel 

Thermostat with 

Occupancy Sensor

Summary of Contents for TB7300A5014B

























Reviews: