manualshive.com logo in svg

Honeywell SPM Flex, User Manual, Page: 17 / 77

Share
Download
Honeywell SPM Flex User Manual Download Page 17

17

SPM Flex Gas Detector

The display

Figure 6 shows the elements of the display that will be seen in various situations�

15:42:01

0

.

123

ppm

H2S - Hydrogen Sulfide

5.678

1.234

2

In monitor

Mute

Monitor mode indicator

                    or

Duty cycle waiting state:

Alarm 1/

Alarm 2/

Inhibit

indicator

Concentration

trend

indicator

Maintenance

Fault

Instrument

Fault

Gas name

Gas concentration

Units

Bar graph 

w/upper, lower 

alarm limits

Status bar

Scroll bar

Monitor mode indicator

or                     

Duty cycle indicator:    

Clock

15:42:01

Battery indicator

Highlighted

option

Main menu

Login  /  Logout

Reset alarms/faults

Monitor mode

Change Chemcassette

Menu

title

Menu

options

01:59

min     sec

Figure 6. 

Elements of typical SPM Flex detector displays

The bar graph on the right shows the current concentration relative to the Alarm 

1 and Alarm 2 setpoints� (The bar’s range is relative to the alarm levels, not to the 

full scale of the selected gas)� 
The color of the status bar changes according to the system status (green = OK/
in monitor, yellow = fault, red = alarm, blue = Out of Monitor mode)� 

Display and navigation

Under normal operation the LCD and LED display system status, gas 
concentrations, and alarms� In set-up, review, calibration, and test modes, the 
LCD shows the relevant menu options and system status bar� The interface is 
navigated using the four buttons: 

Control

Function

Up arrow

Scroll up through lists of options

Down arrow

Scroll down through lists of options

Accept/Select

Accept or select a highlighted option

Power/Cancel

Power/Cancel will turn the detector on if it’s in the off state, will exit back to the previous menu level, and 
will enter Reset mode (quick press), or Power Off mode (long press and hold) from the main display.

In the main display mode, the display shows the current gas name and 

concentration, the monitoring states and faults and/or alarm status, if applicable�

Summary of Contents for SPM Flex














































































Reviews:

No comments