Honeywell Solaris MS7820, User Manual

Page: 91 / 210

Scanner Operation
D
35
S
ECTION
D T
EST
M
ODES
Scanability ON * Scanability OFF
³ 1 1 8 0 1 7
The scanner will enter
scanability test mode.
Do not enable
unless instructed to
by a Metrologic
representative.
³ 1 1 8 0 0 7
Scan Count Mode ON * Scan Count Mode OFF
³ 1 1 8 0 1 6
The scanner will enter scan
count test mode and the
scanner’s firmware number
will transmit to the host.
Do not enable
unless instructed to
by a Metrologic
representative.
³ 1 1 8 0 0 6
Temporary Symbologies
The Temporary Symbologies test
code enables all major types of bar
code symbologies, reduces the
minimum number of characters
required to 1, sets the minimum ITF
characters required to 2, and adds
the symbology name as a prefix to
the transmission. This feature is
disabled when power to the
scanner is cycled
OFF
and
ON
.
³ 9 9 8 0 4 1
Do not enable
unless instructed to
by a Metrologic
representative