Honeywell Solaris 7980g, User Manual, Page: 84 / 252

70 Solaris 7980g User Guide
Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the
Interfunction Delay bar code below, then scan the number of 5ms
delays, and the Save bar code using the Programming Chart .
To remove this delay, scan the Interfunction Delay bar code, then set the number
of delays to 0 . Scan the Save bar code using the Programming Chart .
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the
Intermessage Delay bar code
below, then scan the number of 5ms delays, and the Save bar code using the
Programming Chart .
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0 . Scan the Save bar code using the Programming Chart .
Interfunction Delays
Prefix S canned Data Su ffix
1 2 3 4 5 S TX HT CR LF
Interfunction Delay
2nd Scan Transmission 1st Scan Transmission
Intermessage Delay
Intermessage Delay