Honeywell Solaris 7980g, User Manual, Page: 128 / 252

114 Solaris 7980g User Guide
milliseconds) for this timeout by scanning the bar code below, then setting the tim-
eout (from 0-120 milliseconds) by scanning digits from the
Programming Chart of
this manual, then Save . Default = 500.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
UPC-A Addenda Separator
When this feature is On , there is a space between the data from the bar code and
the data from the addenda. When turned Off , there is no space. Default = On.
UPC-A/EAN-13 with Extended Coupon Code
Use the following codes to enable or disable UPC-A and EAN-13 with Extended
Coupon Code. When left on the default setting (
Off ), the scanner treats Coupon
Codes and Extended Coupon Codes as single bar codes.
If you scan the Allow Concatenation code, when the scanner sees the coupon
code and the extended coupon code in a single scan, it transmits both as one sym-
bologies. Otherwise, it transmits the first coupon code it reads.
If you scan the Require Concatenation code, the scanner must see and read the
coupon code and extended coupon code in a single read to transmit the data. No
data is output unless both codes are read.
Default = Off.
Addenda Timeout
* On
Off
* Off
Allow Concatenation