Honeywell SmartPAC 2, User Manual, Page: 245 / 522

SmartPAC 2 with WPC Integration 1126800
SmartPAC 2 Initialization Mode Chapter 4 page 223
Figure 4 - 20. Units Selection Menu
Table 4 - 2. Units for Tool Information setup
On-screen
Abbreviation
Units On-screen
Abbreviation
Units
IN inches METERS meters
FT feet FT/MIN feet per minute
MM millimeters FT/SEC feet per second
CM centimeters MM/SEC millimeters per second
PSI pounds per square inch MM/MIN millimeters per minute
BAR bars GALS gallons
LBS pounds QTS quarts
TONS tons GRAMS grams
OUNCES ounces SPM strokes per minute
DEG. F degrees Fahrenheit FPM feet per minute
DEG. C degrees Celsius MPM meters per minute
5. To enter the number of decimal places for each item, select the “places” column next to
the desired item. A screen appears where you can enter the number of decimal places
you want, from 1 to 4. For items that will list YES or NO instead of numeric values,
enter eight (8) for the number of places. The next table gives examples of the different
numbers of decimal places you can enter.