Revision 1
STT700 Series HART/DE Option User’s Manual
Page 45
Online/Device
Setup/Advanced
Configuration/Sensors
Sensor 1
Sensor 1 Config Parameters:
Displays the information related to the Sensor
1 Type, Sensor 1 ID
Displays range information of the Sensor 1.
The following limits are read only:
LRL1: Lower range limit for sensor 1
URL1: Upper range limit for sensor 1
LTL1: Lower transducer limit for sensor 1
UTL1: Upper Transducer limit for sensor 1
Allows user to configure “Lower calib Point
1”,“Upper Calib Point 1”, “Sensor 1 wire Type
for RTD/OHM”,”Sensor 1 Bias” and “Sensor 1
install date”
Sensor 2
Sensor 2 Config Parameters:
Displays the information related to the Sensor
2 Type, Sensor 2 ID
Displays range information of the Sensor 2.
The following limits are read only:
LRL2 Lower range limit for sensor 2
URL2 Upper range limit for sensor 2
LTL2: Lower transducer limit for sensor 2
UTL2: Upper Transducer limit for sensor 2
Allows user to configure “Lower calib Point
2”,“Upper Calib Point 2”, ”, “Sensor 2 wire
Type for RTD/OHM”,”Sensor 2 Bias” and
“Sensor 2 install date”
Device
Setup/Advanced
Configuration/Sensors/
RTD/OHM Wiring
Diagram
or TC/mV Wiring
Diagram
RTD/OHM Wiring
Diagram
Or TC/mV Wiring
Diagram
Wiring diagram representing typical
connections for different sensor input types for
the STT700 temperature transmitter.
This
diagram will update dynamically as per sensor
type configured.
**
In case of dual input device user has option to configure LCM as one of the following:
S1 (Input 1), S2 (Input 2), Differential, Average, Redundant and Split Range.
