Honeywell
Safety
3
1
1. SAFETY
ONLY A COMPETENT ELECTRICIAN IS ALLOWED TO
CARRY OUT THE ELECTRICAL INSTALLATION!
This manual contains clearly marked cautions and warnings which are intended for
your personal safety and to avoid any unintentional damage to the product or con-
nected appliances.
Please read the information included in cautions and warnings carefully:
1.1 WARNINGS
=
Dangerous voltage
Risk of death or severe injury
=
General warning
Risk of damage to the product or connected appliances
1
The components of the power unit of the inverter are live when
SmartDrive Compact is connected to mains potential. Coming into
contact with this voltage is extremely dangerous and may cause
death or severe injury. The control unit is isolated from the mains
potential.
2
The motor terminals U, V, W (T1, T2, T3) and the possible brake
resistor terminals -/+ are live when inverter is connected to mains,
even if the motor is not running.
3
The control I/O-terminals are isolated from the mains potential.
However, the relay output terminals may have a dangerous control
voltage present even when inverter is disconnected from mains.
4
The earth leakage current of SmartDrive Compact inverters
exceeds 3.5mA AC. According to standard EN61800-5-1, a rein-
forced protective ground connection must be ensured.
5
If the inverter is used as a part of a machine, the machine manu-
facturer is responsible for providing the machine with a main
switch (EN 60204-1).
