Honeywell SLN 700, Quick Start Installation Manual

Page: 1 / 5

SLN 700 Quick Start Installation Guide
SmartLine Level Non-Contact Radar
34-SL-25-14, Revision 2, November 2020
SLN700 Quick Start Installation Guide 1
This document provides descriptions and
procedures for the quick installation of
Honeywell’s SmartLine Non-Contact Radar
Level Transmitters.
The SmartLine Level Non-Contact Radar is
available as a family of SLN72x models for
liquid and solid applications.
Copyrights, Notices and Trademarks
Copyright 2020 by Honeywell
Revision 1.0, July 2020
Trademarks
SFC, SmartLine, ST 800 and ST 700
are U.S. registered trademarks of
Honeywell Inc.
HART
®
and FOUNDATION™ are
trademarks of the FieldComm
Group™
Revision History
2.0 – November 2020
Table of Contents
INTRODUCTION ........................................................................................................ 1
INSTALLATION .......................................................................................................... 1
MOUNTING THE TRANSMITTER .............................................................................. 2
Installation position ..................................................................................................... 2
Conduit Entry Plugs and Adaptors .............................................................................. 3
WIRING ...................................................................................................................... 3
Hazardous Locations & Intrinsic Safety .................................................................... 4
EU Declaration of Conformity .................................................................................... 4
The full text of the EU declaration of conformity is available at the following internet
address:
https://www.honeywellprocess.com/library/support/Public/Documents/50164363.pdf 4
The SLN700 transmitters comply with the following directives ................................... 4
EMC Conformity ......................................................................................................... 4
The SLN700 transmitters comply with the following EMC standards .......................... 4
Tables
Table 1: Operating Conditions .................................................................................... 1
Table 2: Process Connectors ...................................................................................... 1
Table 3: Minimal distance to tank wall ........................................................................ 2
Table 4: Nozzle specification table.............................................................................. 2
Table 5:
Maximum Loop Resistance (Ω)
..................................................................... 3
Table 6: Hazardous Location Ratings ......................................................................... 4
Table 7: Intrinsic Safety Entity Parameters ................................................................. 4
Table 8: Process Temperature Vs Temperature Class ............................................... 4
Table 9: Display Menu Tree Basic Settings, Display and Diagnostics ........................ 4
Figures
Figure 1: Graphical illustration .................................................................................... 2
Figure 2: Installation position, >200 mm ..................................................................... 2
Figure 3: Conical vessel installation ............................................................................ 2
Figure 4: Nozzle specifications diagram ..................................................................... 2
Figure 5: Agitation ....................................................................................................... 3
Figure 6: Electronic Housing Conduit Entries .............................................................. 3
Figure 7:
Maximum Loop Resistance (Ω)
.................................................................... 3
Figure 8: 2-wire wiring for HART ................................................................................. 3
Documentation
To access complete documentation, including language variants, scan
the QR code below using your smart phone/device or QR code scanner.
Go to the APP store for your free Smartphone QR scanner
Or you can follow the URL to access the online SmartLine HUB page.
The HUB page will contain direct links to open SmartLine product
documentation.
URL QR Code
https://hwll.co/SmartLineHUB
INTRODUCTION
The Smartline SLN700L is available for both liquid and solid non-contact radar level
measurement. Each model is available with a range of flange or threaded antenna,
lens diameters, process connection, and accessories to suit most applications.
Mounting the Transmitter
INSTALLATION
Evaluate the site selected for the SmartLine SLN700 installation with respect to the
process system design specifications in table 1. Please note that the display can
become unreadable below -20C (-4°F) but it will recover once the temperature
increases.
Operating conditions
Table 1: Operating Conditions
Parameter
Operative Limits
Transportation and
Storage
°C °F °C °F
Ambient
Temperature
1
-25 to 80 -13 to 176 -40 to 80 -40 to 176
Humidity %RH
0 to 100 0 to 100
Process Connector
The 80 GHz non-contact radar transmitter has three different series of products and
associated process connections.
Table 2: Process Connectors
Series Medium Applications Process
connections
82 Series Liquid Strong
corrosive liquid
vapors or
foam Flange options
83 Series Liquid Strong
corrosive or
pressure
resistant
liquid
Thread
options
87 Series Solid Storage
vessel/proces
s vessel or
high dust
applications
Flange
options
For list of all options and accessories please refer to the product specifications,
which is available, here:
https://www.honeywellprocess.com/smartline-level-
transmitter.aspx.