manualshive.com logo in svg

Honeywell SILENT KNIGHT SK-5208, Installation And Operation Manual

Share
Download
Honeywell SILENT KNIGHT SK-5208 Installation And Operation Manual Download Page 59

P/N 151204

4-1

Section 4 
Programming

The SK-5208 control panel can be programmed from either the on-board annunciator or the 
SK-5235 remote annunciator. You must be in Programming Mode to program the control 
panel.

4.1

Keypad Operation During Programming

This section describes the function of the buttons on the keypad while in program mode.

Operation/Button

Operation/Description

Enter Step Programming 
mode

Press 

 

 

, followed by installer level code (the factory programmed code is 

123456 or 5208). See Section 4.2.6 for user code programming information.

Moving through 
programming

When you have entered programming correctly, the display will show Zone 1 Options. Press 

 to move to next programming option. See Table 4-4 for list of programming options 

(column 1) and their menu items (column 2).

When the display shows the option you wish to program press 

 to program items in this 

option.

If you receive a trouble beep and the message TRY AGAIN appears you are not 
using an installer level code.

Exit Step Programming 

 Press 

. You are prompted to save programming changes. The default is No. Press the 

up or down arrow to select Yes to save programming changes. Press Enter to complete the 
save and return to normal operation mode.

Down Arrow 

Accepts the entered data and scrolls down to the next menu item.

Enter Button 

Accepts the entered data and scrolls down to the next menu item.

Left Arrow 

Scrolls backwards through the programmable items list for the currently selected option.

Right Arrow 

Scrolls forward through the programmable options list or choices for an the selected item.

Silence Button 

Enables extended programming list so you can scroll through lists of items that have multiple 
components such as, Zone 1 -30. See Section 4.1.2 for an example.

Up Arrow 

Accepts the entered data and scrolls up to the next menu item.

* Button 

Used as shift key when entering special characters (A, B, C, D, or E characters). See Section 
4.1.1 for more information.

# Button 

Clear entry.

2

7

#

firealarmresources.com

Summary of Contents for SILENT KNIGHT SK-5208



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands