Honeywell SILENT KNIGHT SK-5208 Page 115 Installation And Operation Manual Download | Manualshive

Page: 115 / 122

background image

Silent Knight Fire Product Warranty and Return Policy

General Terms and Conditions

•

All new fire products manufactured by Silent Knight have a limited warranty period of 18
months from the date of manufacture against defects in materials and workmanship. See
limited warranty statement for details.

•

This limited warranty does not apply to those products that are damaged due to misuse,
abuse, negligence, exposer to adverse environmental conditions, or have been modified in
any manner whatsoever.

Repair and RA Procedure

•

All products that are returned to Silent Knight for credit or repair require a RA (Return
Authorization) number. Call Silent Knight Customer Service at 800-446-6444 or 763-493-
6435 between 8:00 A.M. and 4:45 P.M. CST, Monday through Friday to obtain a return
authorization number. Silent Knight Technical Support is available at 800-328-0103 or
763-493-6455 between 8:00 A.M. and 5:00 P.M. CST, Monday through Friday.

•

All returns for credit are subject to inspection and testing at the factory before actual deter-
mination is made to allow credit.

•

RA number must be prominently displayed on the outside of the shipping box. See return
address example under Advanced Replacement Policy.

•

Include a packing slip that has the RA number, a content list, and a detailed description of
the problem should be included with each return.

•

All products returned to Silent Knight must be sent freight pre-paid. After product is pro-
cessed, Silent Knight will pay for shipping product back to customer via UPS ground.

•

Return the Silent Knight product circuit board only. Products that are returned in cabinets
will be charged an additional $50 to cover the extra shipping and handling costs over
board only returns.

Do not return batteries

. Silent Knight has the authority to determine

if a product is repairable. Products that are deemed un-repairable will be returned to the
customer.

•

Product that is returned that has a board date code more than 18 months from date of man-
ufacture will be repaired and the customer will be assessed the standard Silent Knight
repair charge for that model.

Advanced Replacement Policy

•

Silent Knight offers an option of advance replacement for fire product printed circuit
boards that fail during the first 6 months of the warranty period. These items must be
returned with transportation charges prepaid and must be accompanied by a return authori-
zation.

•

For advance replacement of a defective board contact your local Silent Knight Distributor
or call Silent Knight at 800-446-6444 or 763-493-6435 to obtain a RA (Return Authoriza-
tion) number and request advanced replacement,

firealarmresources.com

«
...
113
114
115
116
117
...
»

Summary of Contents for SILENT KNIGHT SK-5208



























































































































Reviews:

No comments

Related manuals for SILENT KNIGHT SK-5208

Brand: Hochiki America Corporation Pages: 154

Brand: Wheelock Pages: 9

Brand: Taktis Pages: 211

Brand: Notifier Pages: 4

Brand: VENTCROFT Pages: 5

Brand: DSC Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands