Selection of parameter presettings for a hydraulic unit
SDC
34
MU1H-0438GE51 R0313
5 Selection of parameter presettings for a hydraulic
unit
In the state of delivery, each controller type covers multiple
hydraulic units. Each hydraulic unit can be changed or expanded
by changing and/or adding parameters.
A hydraulic unit is selected with parameter 01 in the "Hydraulics"
menu. The corresponding inputs and outputs are assigned
automatically based on the hydraulics schematic.
This function simplifies the setting of a documented hydraulic unit
considerably.
Additional applications can be covered by setting the individual
parameters. Where necessary, the parameters are also specified
in these mounting instructions. A description of how to access
parameter settings can be found in the parameter list.
Operating in-
formation
Menu
Parameter
Enter
schematic, e.g.
Hydraulics
preselection
"Hydraulics" 01
0201
Pos: 9 /1 56-H oney well/M onta ge/Ap plikatio nen @ 1\ mod _12 085 0777 870 1_6 .doc @ 11 085
6 Applications
See chapter 10
Εφαρμογές θέρμανσης / Heating applications pg. 46
and chapter 11
District heating applications pg. 73.
Pos: 10 / 156 -Hon eywell/ Mont age /Tec hnisch e_Da ten _Allgem ein @ 1\m od_ 120 7651 393 978 _6.d oc @ 101 15
Operation
Summary of Contents for SDC 12-31
Page 2: ...MU1H 0438GE51 R0313 ...
Page 89: ...SDC Εφαρμογές τηλεθέρμανσης District heating applications MU1H 0438GE51 R0313 89 ...
Page 90: ...Εφαρμογές τηλεθέρμανσης District heating applications SDC 90 MU1H 0438GE51 R0313 ...
Page 91: ...SDC Εφαρμογές τηλεθέρμανσης District heating applications MU1H 0438GE51 R0313 91 ...
