manualshive.com logo in svg

Honeywell ScanPal EDA51, User Manual

Share
Download
Honeywell ScanPal EDA51 User Manual Download Page 24

14

EDA51 User Guide

About the Scan Status LED

The Scan Status LED indicates the read status of the imager when scanning a 
barcode. When active, the LED illuminates below the front speaker. To learn more 
about how to use and configure the imager engine for scanning, see 

Chapter 3

: 

Use the Image Engine

 beginning on page 31.

Scan

 

Status LED Descriptions

About Audio Features 

EDA51 has multiple speakers, microphones, and several software tools to 
configure sound volume or enable vibration feedback.

Adjust Speaker Volume 

Use the Volume button on the side of the computer to adjust the volume of 
ringtones, media, notifications, and alarms.

Note:

The volume setting varies by OS version.

To quickly change the active speaker volume level:

•

Press the top of the Volume button (+) to raise the volume of the active speaker.

LED Color

Description

Green

Good read of a barcode.

Red

Failure to scan barcode. 
Check to make sure you have the correct symbology enabled.

Scan Status LED

Summary of Contents for ScanPal EDA51





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands