6
EDA51 User Guide
Replace the Battery
If your battery power is low, you need to either charge the battery in the computer,
or replace it with a charged battery.
Remove the battery
1. Press and hold the
Power
button until the options menu appears.
2. Tap
Power off
.
3. Disconnect one end of the hand strap from the computer, if installed.
4. Press and hold down the button on the battery latch, and then slide the lock to
the unlocked position.
5. Lift up on the edge of the battery cover and remove it from the computer.
Caution: Improper battery replacement or incompatible device usage
may result in risk of burns, fire, explosion, or other hazard.
Dispose of lithium-ion batteries according to local regulations.
Risk of fire and burns if improperly handled. Do not open, crush,
heat above 60°C (140°F), or incinerate.
Summary of Contents for ScanPal EDA51
