manualshive.com logo in svg

Honeywell ScanPal EDA51, User Manual

Share
Download
Honeywell ScanPal EDA51 User Manual Download Page 11

EDA51 User Guide

1

CHAPTER

1

ABOUT THE COMPUTER 
FEATURES

This chapter introduces the ScanPal™ EDA51 mobile computer. Use this chapter to 
learn about the basic computer features, functions, and accessories.

Note:

Device applications and settings vary by computer model and OS version. Your 
computer may not include all the features shown in the manual.

About the Mobile Computer

ScanPal EDA51 mobile computers deliver real-time connectivity, advanced data 
capture, and future-proof investment protection. All EDA51 models come 
equipped for fast Wi-Fi connectivity with a WLAN 802.11 a/b/g/n/ac radio and 
Bluetooth (v4.2) technology that includes Bluetooth Low Energy (BLE) support. 
EDA51-1 models provide additional connectivity with a wireless Wide Area Network 
(WWAN) radio for high speed data and quality voice support across all network 
technologies. EDA51 WWAN models also include an integrated global positioning 
satellite (GPS) receiver that supports GPS protocols including, Simultaneous 
GNSS Receiver Support for GPS, GLONASS, Galileo and Beidou GPS.

Note:

Throughout this manual, all versions of the mobile computer are referred to as the 
EDA51 unless information is specific to a particular model.

Summary of Contents for ScanPal EDA51





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands