TK_S014 – Installation Manual
21
Collecting device information
The components enclosed in the packaging include a bar code label. The person responsible for installing
the terminal must apply this label to the corresponding identification form, and indicate the location of the
terminal in the appropriate box (see example in Table 5).
The information collected can then be used for the RTU configuration on EBI Temaline application.
Description of location
Office entrance area, first floor - staircase A
Description of TemaServer
Panel 2 entrance area, first floor – staircase A
RTU
A08
RTU
-
RTU
-
RTU
-
Table 5. Example of Completed Identification Form