Honeywell RP2B User Manual Download Page 11

Page: 11 / 70

RP2/RP4 User Guide

3. Connect the AC power cord to the power supply and plug into an outlet.

Note:

Operating the printer while it is connected to the AC power supply can shorten the life
of the battery and is not recommended.

Download Required Software

Download and install the NETira® CT Printer Configuration Utility and Windows
Printer Drivers software from the Technical Support Downloads Portal at

honeywell.com/PSSsoftware-downloads

Software Downloads

Product support is available online through

Technical Support

. Software updates

can be accessed through the

Software Downloads

portal. You will need to create a

login account for portal access. Additional information such as purchased date,
service agreement number, maintenance plan number, or software license number
may be required for downloads.

1. Go to

honeywell.com/PSSsoftware-downloads

2. Create a login account if you have not already created one.

3. Install the Honeywell Download Manager tool. See “Note” on the portal page.

This tool is required for downloads.

4. Locate the app or upgrade you want to download in the Software directory.

Summary of Contents for RP2B







































































Search results

Summary of Contents for RP2B

Reviews:

Related manuals for RP2B

Brands by name

Popular brands

Honeywell RP2B, User Manual

Search results

Summary of Contents for RP2B

Reviews:

Related manuals for RP2B

Brands by name

Popular brands