Honeywell Rapid Eye Administrator'S Manual Download Page 71

Page: 71 / 294

Rapid Eye Multi-Media DVR System Administrator Guide

Document 800-02953V4 Rev A

03/10

Click Upgrade. You are warned that all users will be disconnected from the unit. Click
Yes to continue.

Figure 4-5

Remote View Software Upgrade

Click Browse.

Find and Open the software upgrade file you have downloaded.

Click Next. The message that opens describes the exact version that you are
upgrading to. Click Next to start the upgrade.

The unit will reboot automatically once the upgrade has completed.

Maintenance Reference

Ending Maintenance

To end a

Maintenance Session

, close the Maintenance window.

Other actions can also close sessions:

•

Click

•

Click Disconnect on the Actions menu, OR

•

Close View

Summary of Contents for Rapid Eye







































































































































































































































































































Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands

Honeywell Rapid Eye, Administrator'S Manual

Search results

Summary of Contents for Rapid Eye

Reviews:

Related manuals for Rapid Eye

Brands by name

Popular brands