Honeywell Rapid Eye, Administrator'S Manual

Page: 144 / 294

144
Configuring Other Hardware
Purpose
A unit’s security settings need to be updated if a Multi SA adds, changes or removes:
• Alarm stations. See Adding an Alarm Station Name and Reports , page 218 , and
Making an Alarm Station Operational on page 233 .
• The system password. See System Password , page 184 , and Security Priorities on
page 180 .
• Authorized remote operators of a site. See Denying Access to a User of Your Multi
System on page 214 .
• Authorized onsite operators. See Central User Management on page 170 .
Removing a Site After Updating Security
After updating the security of a Multi-Media unit, care should be taken to make a record of
the system password. The system password is needed if you need to make a new site
definition for the Multi-Media unit. See
Deleting a Site on page 37 .
System Files
Your Multi System Administrator (Multi SA) or your organization’s security officer may find
it useful to download a copy of a unit’s System Log or other system file, as needed.
Downloads of files from a Multi-Media unit are safer than uploading files. Uploads should
be performed by trained personnel.
Figure 8-3 File Transfers to or from a Unit
TIP! Check if the
System Operational
message appears in the Feedback box before
performing the procedure Downloading a File from a Multi-Media Unit , page 145 .
Downloading.
Receiving a file from
a Multi-Media unit.
Uploading and
promoting.
Sending a file to a
Multi-Media unit.