Honeywell Rapid Eye Hybrid LT, Installation Manual

Page: 16 / 86

16
Caution Users should not attempt to make such connections themselves
but should contact the appropriate electric inspection authority, or
electrician, as appropriate.
Manufacturer’s Declaration of Conformance
Honeywell Video declares that HREwRxxyzzz Rapid Eye Hybrid LT remote units are in
conformity with Council Directives:
2004/108/EC (EMC), 2006/95/EC (LVD).
These EuroNorms and harmonized standards were applied:
•
EN55022: 2006 + A1: 2007, Information Technology Equipment. Radio disturbance
characteristics limits and methods of measurement;
• EN50130-4: 1995 + A1: 1998 + A2: 2002, Alarm/security immunity requirements;
• EN60950-1: A11: 2006, Safety of ITE;
• EN61000-3-2: 2006 + A2: 2009, Power-line Harmonics;
• EN61000-3-3: 2008, Flicker.
Specification Summary
Specification Description
Operating Environment
Temperature 40°F to 104°F (+5°C to +40°C), EN 50130-5 Environmental Class 1
Power 100 - 240 V~, 50 / 60 Hz, auto-ranging
Heat dissipation 410 BTU/hr
Interface
Cable requirement Cables included with the unit are listed in Table 2-1 , on page 25 .
Other connectors: BNC (video IN/OUT, public display), RJ-11
(dial-up), RJ-45 (LAN), USB (mouse and keyboard), audio card
(OUT/MIC IN), screw terminal connectors (ALARM & CONTROL),
and custom RJ-45 (serial ports).
Network access Auto-sensing for 100BaseT or 10BaseT. LAN/WAN use through
DSL or cable.
Modem (North
America only) Internal. Programmable. Complies with FCC (ACTA) Part 68,
Industry Canada, TBR-21 - Public Switched Telephone Network
(PSTN) and Private Branch Exchange (PBX).
Local video output Television monitor, for public display.
VGA monitor, for operation and/or public display.