BioHarness 3
QUICK REFERENCE
1
By Honeywell
IMPORTANT!
Follow all instructions here before operating the BioHarness 3. Make sure your strap is
the correct size before using it (available in two sizes, Small XS-M or Large M-XL). For more details,
refer to the BioHarness 3, RAELink3 (or RAELink3 Z1, which has the same functions), and ProRAE
Guardian User’s Guides or Quick References.
The BioHarness 3 measures the following parameters:
Sensor
Unit
Range
Definition
Breath Rate
Bth/m (breaths per minute)
0 to 120
Heart Rate
Bts/m (beats per minute)
0 to 240
Activity
VMU (Vector Magnitude
Units)
±16
<0.2 = Low Activity
<0.8 = Walking/Jogging
>0.8 = Running
Posture
Degrees
0 to 180
0 = Vertical
90 = Horizontal
180 = Inverted
Temperature
Degrees F or C
50° to 140° F
10° to 60° C
Operation
1.
Moisten the gray sensor pads on the back of the strap with water.
2.
Snap the BioHarness Echo Module onto the BioHarness 3 by clicking the bottom in first and then the top.
3.
Power on the BioHarness Echo Module by pressing the button in the center until all four LEDs flash.
4.
Link the BioHarness Echo Module to the RAELink3.
Note:
It links automatically after the initial Bluetooth pairing.
5.
Attach the shoulder strap with Velcro in the back and fit the clasp to the loop in the front, and
then do the same with the clasp and loop in the front.
Note:
BioHarness Echo Module should be under the left armpit when properly positioned.
