Honeywell Q7002A Product Data Download Page 2

Q7002A,B,C INTERFACE MODULES

63-2551

2

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:

1.

Your local Home and Building Control Sales Office (check white pages of your phone directory).

2.

Home and Building Control Customer Logistics
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386

3.

www.honeywell.com/building/components

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

SPECIFICATIONS

Models:

Economizer Interface Modules:

Q7002A1001 with enclosure.
Q7002A1019 with track mount.

Universal Analog Interface Modules:

Q7002B1009 with enclosure.
Q7002B1017 with track mount.

Pulse-to-Analog Interface Modules:

Q7002C1007 with enclosure.
Q7002C1015 with track mount.

Dimensions:
See Fig. 1.

Approval Ratings:
Enclosure Models: NEMA 1.

Q7002A Economizer Interface Module

Electrical Ratings:

Supply Voltage:

24 Vac 

±

10%.

24 Vdc 

±

10%.

Input Impedance: 10K ohm.
Output: 30 Vac, 5A spdt relay.

Signal Input:
W7100 or W973 Zone Control Panel economizer output.

Accuracy:

±

1% of span.

Relay Differential:
0.19 Vdc.

Ambient Ratings:

Temperature Range: -40

°

F to 158

°

F (-40

°

C to 70

°

C).

Humidity Range: 5% to 95% RH (noncondensing).

Weight:
6 oz (0.18 kg).

Fig. 1. Q7002 Interface Module dimensions in in. (mm).

Q7002B Universal Analog Interface Module

Electrical Ratings:

Supply Voltage:

24 Vac 

±

10%.

24 Vdc 

±

10%.

Input: See Table 1.
Input Impedance: See Table 1.
Output: 0-18 Vdc or 0-20 mA (adjustable).

Accuracy:

±

1% of span.

3-3/8

(86)

4-9/16

(116)

4-7/8 (124)

4-5/8 (118)

2-3/4 (70)

2 (51)

1(25)

3/8

(10)

3-1/4

(83)

3-1/4

(83)

M13266

1-5/8

(41)

1

1

1

2

2

2

THE Q7002A SNAP-TRACK MEASURES 3-1/2 (89) ON THIS DIMENSION.

ENCLOSURE MODELS

SNAP-TRACK MODELS

THE Q7002A SNAP-TRACK MEASURES 1-3/8 (35) ON THIS DIMENSION. 

Summary of Contents for Q7002A









Reviews: