manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 9 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 9

PX4ie and PX6ie High Performance Printer User Guide

vii

Customer Support

Technical Assistance

To search our knowledge base for a solution or to log in to the Technical Support 
portal and report a problem, go to 

www.hsmcontactsupport.com

.

For our latest contact information, see 

www.honeywellaidc.com/locations

.

Product Service and Repair

Honeywell International Inc. provides service for all of its products through service 
centers throughout the world.  To find your service center, go to 

www.honeywellaidc.com 

and select Support.  Contact your service center to obtain 

a Return Material Authorization number (RMA #) before you return the product.

To obtain warranty or non-warranty service, return your product to Honeywell  
(postage paid) with a copy of the dated purchase record.

Limited Warranty

For warranty information, go to 

www.honeywellaidc.com

 and click 

Get Resources

 > 

Product Warranty

.

Summary of Contents for PX4ie













































































































Reviews:

No comments