manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 87 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 87

PX4ie and PX6ie High Performance Printer User Guide

77

5.

Click the 

Services

 tab and select 

Firmware Upgrade

. The Firmware Upgrade 

screen appears, showing the current firmware version.

6.

Click 

Browse

 to locate the upgrade file. Select it and click 

Open

.

7.

Click 

Upgrade

. The printer web page shows that it is upgrading firmware on 

your printer.

Upgrade Firmware from a USB Storage Device

Place the upgrade file in the root directory on the USB storage device.

Note:

For best results, use a USB storage device that contains no other files besides the 
upgrade file.

1.

Copy the firmware upgrade file to the root directory of the USB storage device.

2.

Turn the printer off.

3.

Insert the USB storage device into a USB host port.

4.

Restart your printer. An upgrading firmware message appears as the upgrade 
file is loaded into the printer memory. This process may take a few minutes.

5.

Remove the USB storage device.

Summary of Contents for PX4ie













































































































Reviews:

No comments