manualshive.com logo in svg

Honeywell PX4ie, User Manual, Page: 13 / 108

Share
Download
Honeywell PX4ie User Manual Download Page 13

PX4ie and PX6ie High Performance Printer User Guide

3

About the Ready Screen 

After the printer completes the startup process, the Ready screen appears. By 
default, the screen displays the printer command language. You can customize the 
screen to display different kinds of information.

The status bar at the top of the screen displays information and status icons.

About the Main Menu

The Main Menu contains features to help you configure and manage your printer. 

Note:

The printer cannot print while the Main Menu is on the screen.

Icon

Description 

Printer information. Select this icon to view basic printer 
information. 

Connectivity. Blinks when data is moving through a wired 
connection to the printer.

Item 

Description

Programs. Lists the programs installed on the printer. This list includes utility programs provided as 
part of the printer firmware, as well as programs you installed on the printer. The Programs menu 
item only appears if the printer command language is set to Fingerprint.

Settings. Lets you view and change printer settings.

Summary of Contents for PX4ie













































































































Reviews:

No comments