Honeywell PX4i, User Manual, Page: 84 / 158

72 PX4i and PX6i High Performance Printer User Guide
Use the following table to understand the mail settings.
Configuring SNMP Settings
Use the SNMP page to view and change SNMP settings.
To configure SNMP settings
1. Click Network Admin > SNMP.
2. Change the SNMP settings.
3. Click Add to add trap settings. You can define up to four authentication failure
traps.
4. After you add a trap, it appears in the Trap Address Settings list. You can edit or
delete each trap in the list by clicking Edit or Delete.
5. Click Submit SNMP settings.
Setting Description
Mail (SMTP) Server Choose a configuration method for your mail server settings:
• SMTP settings from DHCP: Choose this setting if you want the
printer to receive settings automatically from your DHCP server. This
setting requires that you choose DHCP and IP Selection in the TCP/
IP section.
• Manual settings: Choose this option to manually configure the Mail
Server address and port. The default port is 25.
Mail addresses Defines the e-mail addresses to use when the printer sends alert
messages:
• From address: The address that displays as the sender of alert
messages. E-mail will be returned to this address if the recipient is
unreachable. To prevent e-mail bounces when the recipient is
unreachable, leave this field empty.
• To address: The recipient of alert messages. To enter several
addresses, separate them with a comma (,) or a semicolon (;).