Honeywell PX4i, User Manual, Page: 57 / 158

PX4i and PX6i High Performance Printer User Guide 45
12. Close the front door and media cover.
13. Set the Paper Type to Thermal Transfer Ribbon (TTR).
• On your printer’s keypad, press to enter the Setup menu.
• If you are using Fingerprint, go to Media > Paper Type > Transfer.
• If you are using IPL, go to Media > Paper Type > TTR.
• Press .
• Press to exit the Setup menu.
Printing a Test Label
You can print a test label (perform a testprint) to:
• make sure that your printer is working properly.
• get your printer’s setup, hardware, and network information.
• get RFID tag information.
• check print quality and determine which adjustments to make.
To perform a testprint
1. Press to enter the Setup menu, and use the keypad to go to the TESTPRINT
menu:
• If you are running Fingerprint, go to SETUP > PRINT DEFS > TESTPRINT.
• If you are running IPL, go to SETUP > TEST/SERVICE > TESTPRINT >
CONFIG.
2. Select a testprint to perform. For more information, see the next tables.
Setup
Enter
Setup
Setup