POL-200-TS User Manual
14
3.7 Loop
The tool recognizes the sensors and modules
on the loop before powering the fire alarm
control panel (FACP). The POL-200-TS unit is
compatible with CLIP (Classic Loop Interface
Protocol) with 99 sensors and 99 modules and
the new Advanced or Opal protocol with up to
159 sensors and 159 modules.
By pressing
the system carries out a
reading cycle that scans all the positions to
find the devices connected (sensors or modules
according to what has been selected in the pre-
vious screen).
The reading cycle can be continuous if
is
selected. To stop the continuous reading cycle
press
, then select
and press
to carry out only one cycle.
In the
auto-programming
menu, the tool will identify the number of sensors or modules that
are connected in the loop according to their type:
