Honeywell PM23c User Manual Download Page 73

Page: 73 / 164

Chapter 4 – Configure the Printer

PM23c, PM43, and PM43c Mid-Range Printer User Manual

Restrict Access to the Main Menu

By default, all menus are available from the Main Menu the first time you
turn on the printer. If necessary, you can require a PIN to restrict access
to menus or you can disable access to all menus.

Go to the Display menu for the printer:

•

From the web page, select

Configure > System Settings >

Display

•

From the Main Menu on a full touch screen, select

Settings >

System Settings > Display

Select a Menu Access setting and save your changes.

If you select

Enable with PIN

, you also need to type in a PIN and save

your changes.

Menu Access
Setting

Description

Enable (default)

All users can access the menus from the Main
Menu and from the USB flash drive menu.

Enable with PIN

Users need to enter a PIN to access the Main
Menu or USB flash drive menu.

Disable

Users cannot access the menus from the Main
Menu or from the USB flash drive menu.

Summary of Contents for PM23c





































































































































































Search results

Summary of Contents for PM23c

Reviews:

Honeywell PM23c, User Manual, Page: 73 / 164

Search results

Summary of Contents for PM23c

Reviews: