manualshive.com logo in svg

Honeywell PM23c, User Manual, Page: 34 / 164

Share
Download
Honeywell PM23c User Manual Download Page 34

Chapter 2 – Set Up the Printer

24

PM23c, PM43, and PM43c Mid-Range Printer User Manual

Connect the Printer to Power

The full touch printer goes through a startup wizard the first time you turn 
on the power. The icon printer goes through an LED startup sequence the 
first time you turn on the power.

1

Connect one end of the power cord to the back of the printer and 
connect the other end to AC power.

2

Press the power switch to turn on the printer. As the printer starts up:

•

a progress bar appears on the full touch interface. When the 
printer has finished starting up, the startup wizard appears. After 
you complete the startup wizard, you can choose to complete 
more wizards or you can go to the Ready screen.

•

the icons turn on and then turn off one at a time on the icon printer. 
When the printer has finished starting up, the blue Ready-to-Work 
indicator turns on and stays on.

•

if Power Up Action is set to Smart Calibration, the printer calibrates 
media type, printing method, and media length.

If a condition occurs that will prevent printing, the Ready-to-Work 
indicator blinks.

Summary of Contents for PM23c





































































































































































Reviews:

No comments