Honeywell PM23c User Manual Download Page 104

Page: 104 / 164

Chapter 5 – Troubleshoot the Printer

PM23c, PM43, and PM43c Mid-Range Printer User Manual

Restore Defaults from the Main Menu

If you have a printer with a full touch display, you can restore the printer
to default settings from the

Tools

menu.

From the Ready screen, open the Main Menu.

Select

Tools > Restore Defaults

. The Restore Defaults menu

appears with all items in the list selected by default.

To restore all default settings, continue with the next step. You can
also change the settings that are restored as follows:

•

To keep the current network settings, clear the

Network settings

check box.

•

To keep all applications, fonts, and other files you have installed
on the printer, clear the

User files

check box.

•

To keep all current system settings, clear the

System Settings

check box.

Tap the right arrow and when prompted tap

Yes

to restore default

settings and reboot. A confirming message appears.

To return to the Main Menu without restoring the default settings,
select

. To return to the Restore Defaults list without restoring any

defaults, select

Cancel

Restore Defaults with a Hardware-Based Reset

You can restore the printer defaults on a full touch or icon printer by
performing a hardware-based reset.

Turn the printer off and open the media cover.

Turn the printhead lift lever counterclockwise to raise the printhead.

Turn the printer on while pressing and holding the

Feed

button.

Note:

Although this procedure restores all defaults on the full touch

printer, it only restores settings on the icon printer. You need to use
PrintSet or another method to restore all defaults on an icon printer.

Summary of Contents for PM23c





































































































































































Search results

Summary of Contents for PM23c

Reviews:

Honeywell PM23c, User Manual, Page: 104 / 164

Search results

Summary of Contents for PM23c

Reviews: