manualshive.com logo in svg

Honeywell PD45, User Manual, Page: 49 / 94

Share
Download
Honeywell PD45 User Manual Download Page 49

PD45 User Guide

39

Load a Printer Profile Using Programming Commands

You can load a saved printer profile to another printer by sending programming 
commands directly from your PC to the printer through a terminal program (such 
as HyperTerminal), a serial connection, or a network connection. All commands are 
case-sensitive.

Note:

To load printer profiles that modify communication settings that require itadmin 
rights, you must log in as an itadmin: RUN “su- p pass itadmin” for FP/DP.

Install a Configuration File from a USB Storage Device

After you save an .xml configuration file to a USB storage device, you can install it 
on the printer at any time.

1.

Insert the USB storage device in the printer USB host port.

2.

From the Ready screen, press the Main Menu button. The Main Menu appears.

3.

Select 

Tools > USB Menu

.

4.

Select 

Configuration

.

5.

Select 

Install Configuration

. The printer imports the configuration file.

•

For most printer languages, the configuration file is imported directly into 
the working configuration and is not copied to the /config directory.

•

An IPL configuration file is copied to /home/user/config/ipl.

6.

Press 

OK

 when the confirmation message appears.

Export a Configuration File to a USB Storage Device

You can save an .xml configuration file to a USB storage device and install it on 
other printers.

1.

Make sure the USB storage device has a single partition and is formatted as 
FAT16 or FAT32.

2.

Insert the storage device into the printer USB host port.

3.

From the Ready screen, press the Main Menu button. The Main Menu appears.

4.

Select 

Tools > USB Menu

.

Connection

Programming Commands

Printer running 
Fingerprint

RUN “/system/usr/bin/cfg -o xmlimportset -k /home/user/profiles/
myprofile”

Printer running IPL

<STX><ESC>.x,/system/usr/bin/cfg -o xmlimportset -k /home/user/
profiles/myprofile<ETX>

Telnet connection over 
Port 23

/system/usr/bin/cfg -o xmlimportset -k /home/user/profiles/myprofile

Summary of Contents for PD45































































































Reviews:

No comments