manualshive.com logo in svg

Honeywell PD45, User Manual, Page: 43 / 94

Share
Download
Honeywell PD45 User Manual Download Page 43

CHAPTER

4

 PD45 User Guide

33

CONFIGURE THE PRINTER

Use one of these methods to view and change printer settings:

•

Printer web page (PD4500C only)

•

Main Menu (PD4500C only)

•

PrintSet 5

•

Programming commands

Printer Configuration Menus

The structure of the printer configuration menus is consistent among the different 
interfaces. The same organization appears whether you are accessing the menus 
through the web page or the printer Main Menu. There are four main printer 
configuration menus for each interface:

•

Printing 

•

System Settings

•

Alert 

•

Communications 

Use the following table to understand where information is located in the printer 
configuration menus. Not all configuration items appear in each type of interface.

Configuration Menu

Description

Printing

Media and Print Quality

System Settings 

General, Display, Manage I/O, Manage Services, 
and Maintenance Alerts

Alerts

Error, Warning, and Information

Communications

General, Security, and Network

Summary of Contents for PD45































































































Reviews:

No comments