9
OELD Operating Instructions
3 Installation
3.2.1 Installation to a Flat Surface
The OELD may be fixed directly to a suitable flat surface, using the integral mounting points (dimensions shown below).
Note
When installing OELD ensure that the correct sensor orientation is considered. Refer to the sensor manufacturer’s instructions.
Ensure that mounting bolts are fully tightened and suitable locking washers are used.
7.8"
4.5"
2.1"
0.6"
1.8"
3.2"
6.1"
0.9"
1.2"
1.8"
6.0"
5.6"
1.7"
0.6"
196.9 mm
133.8 mm
52.2 mm
15.9 mm
44.9 mm
80.7 mm
158.78mm
24.0mm
31.8mm
44.9 mm
152.4 mm
124.2 mm
42.4 mm
14.4 mm
<Figure 5. OELD Dimensions>
3.2.2 Optional Pipe and Ceiling Mount Installation
The OELD may be fixed to a vertical pipe of 2
"
to 6
"
(50 to 150 mm) in diameter using the Pipe Mounting kit. This kit (1226A0358)
consists of one bracket, two sets of carriage bolts, nuts and lock washers.
The Ceiling Mount Bracket Kit (1226A0355) allows the OELD to be mounted to the ceiling. This kit includes two stainless steel
ceiling mount brackets, bolts and nuts.
<Figure 6. Pipe and Ceiling Mount Installation Examples>
