4
OELD Operating Instructions
1 Safety
1.4 Important Information
This manual is for use with the OELD smart junction box only.
Honeywell Analytics can take no responsibility for installation and/or use of its equipment if not done so in accordance with the
appropriate issue and/or amendment of the Operating Instructions.
The reader of these Operating Instructions should ensure that it is appropriate in all details for the exact equipment to be installed
and/or operated. If in doubt, contact Honeywell Analytics for advice.
The following types of notices are used throughout these Operating Instructions:
WARNING
Identifies a hazardous or unsafe practice which could result in severe injury or death to personnel.
Caution
Identifies a hazardous or unsafe practice which could result in minor injury to personnel, or product or property damage.
Note
Identifies useful/additional information.
Every effort has been made to ensure the accuracy of this document, however, Honeywell Analytics can assume no responsibility for
any errors or omissions in this document or their consequences.
Honeywell Analytics would greatly appreciate being informed of any errors or omissions that may be found in the content of this
document.
For information not covered in this document, or if there is a requirement to send comments/corrections about this document, please
contact Honeywell Analytics using the contact details given on the back page.
Honeywell Analytics reserve the right to change or revise the information supplied in this document without notice and without
obligation to notify any person or organization of such revision or change. If information is required that does not appear in this
document, contact the local distributor/agent or Honeywell Analytics.
