manualshive.com logo in svg

Honeywell NOTIFIER SFP-10UD Series, Manual, Page: 14 / 164

Share
Download
Honeywell NOTIFIER SFP-10UD Series Manual Download Page 14

14

SFP-5UD & SFP-10UD Series Manual—

 P/N 52879:C2  1/24/2012

Product Description

Product Features

The following versions of the SFP-5UD and SFP-10UD are available:  

1.1  Product Features

•

Built-in DACT (Digital Alarm Communicator/Transmitter)     

•

Style B (Class B) IDC (Initiating Device Circuit)  

SFP-5UD - five programmable IDCs

SFP-10UD - ten programmable IDCs

•

Four Style Y (Class B) NAC (Notification Appliance Circuit) 
- special application power

•

Three programmable Form-C relays

•

Built-in Programmer

•

Touchtone/Rotary dialing

•

Programmable Make/Break Ratio

•

Optional Dress Panel: DP-51050B (black) or DP-51050 (red)

•

A modified Dress Panel is provided standard with Canadian models: includes an N-ANN-LED 
Annunciator module

•

Optional Trim Ring TR-CE (red) or TR-CE-B (black) for semi-flush mounting the cabinet

•

ANN-BUS for connection to optional: 

N-ANN-80 Remote LCD Annunciator

N-ANN-I/O LED Driver

N-ANN-S/PG Printer Module

N-ANN-RLY Relay Module

N-ANN-LED Annunciator Module

•

80-character LCD display (backlit)

•

Real-time clock/calendar with daylight savings time control

•

History log with 256 event storage

•

Control Buttons

ACK (Acknowledge)

FACP Version

Description

SFP-5UD

Five Zone Panel: 120 VAC with FLPS-3 power supply providing 3.0 amps 
total 24 VDC output current

SFP-5UDC

Five Zone Panel: 120 VAC with FLPS-7 power supply providing 7.0 amps 
total 24 VDC output current.  Includes built-in N-ANN-LED Annunciator.  
This panel is approved for Canadian applications

SFP-5UDE

Five Zone Panel: 240 VAC with FLPS-7 power supply providing 7.0 amps 
total 24 VDC output current

SFP-10UD

Ten Zone Panel: 120 VAC with FLPS-7 power supply providing 7.0 amps 
total 24 VDC output current

SFP-10UDC

Ten Zone Panel: 120 VAC with FLPS-7 power supply providing 7.0 amps 
total 24 VDC output current.  Includes built-in N-ANN-LED Annunciator.  
This panel is approved for Canadian applications.

SFP-10UDE

Ten Zone Panel: 240 VAC with FLPS-7 power supply providing 7.0 amps 
total 24 VDC output current

NOTE:

Unless otherwise specified, the information in this manual applies to all versions of the 

panels.

Summary of Contents for NOTIFIER SFP-10UD Series





































































































































































Reviews:

No comments