Canadian DN-60085:J • 12/20/2013 — Page 5 of 6
FST-851A:
FlashScan thermal detector 135°F (57°C).
See
DN-6936.
FST-851RA:
FlashScan thermal detector 135°F (57°C) with
rate-of-rise.
See DN-6936.
FST-851HA:
FlashScan 190°F (88°C) high-temperature ther-
mal detector.
See DN-6936.
FAPT-851A:
FlashScan Acclimate Plus low-profile multi-sen-
sor detector.
See DN-6937.
FSL-751A:
FlashScan VIEW laser photo detector.
See DN-
6886.
DNR:
InnovairFlex low-flow non-relay duct-detector housing
(order FSP-851A/FSP-851RA separately). Replaces FSD-
751PL/FSD-751RPL.
See DN-60429.
DNRW:
Same as above with NEMA-4 rating, watertight.
See
DN-60429.
B224RBA:
Low-profile relay base. See DN-60054.
B224BIA:
Isolator base for low-profile detectors. See DN-
60054.
B210LPA:
Low-profile base. Standard U.S. style. Replaces
B710LPA. See DN-60054.
B501A:
European-style, 4" (10.16 cm) base. See DN-60054.
B200SA:
Intelligent programmable sounder base, capable of
producing a variety of tone patterns including ANSI Temporal
3. Compatible with sychronization protocol.
See DN-60054.
B200SCOA:
Based on B200SA, with added CO detector
markings in English/French.
B200SRA
: Sounder base, Temporal 3 or Continuous tone.
See DN-60054.
FMM-1A:
FlashScan monitor module.
See DN-6720.
FDM-1A:
FlashScan dual monitor module.
See DN-6720.
FZM-1A:
FlashScan two-wire detector monitor module.
See
DN-6720.
FMM-101A:
FlashScan miniature monitor module.
See DN-
6720.
FCM-1A:
FlashScan control module.
See DN-6724.
FCM-1-RELA:
FlashScan releasing control module.
See DN-
60390.
FRM-1A:
FlashScan relay module.
See DN-6724.
FDRM-1A:
FlashScan dual monitor/dual relay module.
See
DN-60709.
NBG-12LX:
Manual pull station, addressable.
See DN-6726.
N-MPS series:
Manual pull stations, addressable and conven-
tional. For use in Canada only.
See DN-5497.
FM-955:
Addressable pull station with two FMM-101A mod-
ules.
FM-9551:
Addressable pull station with one FMM-101A mod-
ule.
FM-955-20C:
Addressable pull station with two open contacts.
FM-9551S20C:
Addressable pull station with one open and
one closed extra contacts.
ISO-XA:
Isolator module.
See DN-2243.
XP6-CA:
FlashScan six-circuit supervised control module.
See DN-6924.
XP6-MAA:
FlashScan six-zone interface module; connects
intelligent alarm system to two-wire conventional detection
zone.
See DN-6925.
XP6-RA:
FlashScan six-relay (Form-C) control module.
See
DN-6926.
XP10-MA:
FlashScan ten-input monitor module.
See DN-
6923.
SLC-IM:
SLC integration module, for VESDAnet detectors.
See DN-60755\
N
ETWORKING
O
PTIONS
NCM-W, NCM-F:
Standard Network Communications Mod-
ules. Wire and multi-mode fiber versions available.
See DN-
6861
.
HS-NCM-W/MF/SF/WMF/WSF/MFSF:
High-speed Network
Communications Modules that can connect to two nodes.
Wire, single-mode fiber, multi-mode fiber, and media conver-
sion models are available.
See DN-60454.
RPT-W, RPT-F, RPT-WF:
Standard-network repeater board
with wire connection (RPT-W), multi-mode fiber connection
(RPT-F), or allowing a change in media type between wire and
fiber (RPT-WF). Not used with high-speed networks.
See DN-
6971.
ONYXWorks:
UL-listed graphics PC workstation, software,
and computer hardware.
See DN-7048 for specific part num-
bers.
NFN-GW-EM-3:
NFN Gateway, embedded.
See DN-60499.
NWS-3:
NOTI•FIRE•NET™
Web Server.
See DN-6928.
CAP-GW:
Common Alerting Protocol Gateway.
See DN-
60576.
VESDA-HLI-GW:
VESDAnet high-level interface gateway.
See
DN-60753.
LEDSIGN-GW:
UL-listed sign gateway. Interfaces with classic
and high-speed NOTI•FIRE•NET networks through the NFN
Gateway.
See DN-60679.
OAX2-24V:
UL-listed LED sign, used with LEDSIGN-GW.
See
DN-60679.
E
NCLOSURES
, C
HASSIS
,
AND
D
RESS
P
LATES
CAB-BM Marine System:
Protects equipment in shipboard
and waterfront applications. Also order
BB-MB
for systems
using 100 AH batteries. For a full list of required and optional
equipment, see
DN-60688.
NFS-LBB:
Battery Box (required for batteries over 26 AH).
NFS-LBBR:
Same as above, but red.
BB-UZC:
Backbox for housing the UZC-256. Required for
NFS-320 applications, black. For red, order BB-UZC-R.
SEISKIT-320/B26:
Seismic mounting kit. Required for seismic-
certified applications with NFS-320C and BB-26. Includes bat-
tery bracket for two 26 AH batteries.
SEISKIT-LBB:
Seismic kit for the NFS-LBB. Includes battery
bracket for two 55 AH batteries.
O
THER
O
PTIONS
411 Series:
Slave Digital Alarm Communicator Transmitters.
See DN-6619
.
IPGSM-4GC:
Internet and Digital Cellular Fire Alarm Commu-
nicator. Provides selectable configurable paths: cellular only,
IP only, or IP primary with cellular backup. Connects to the pri-
mary and secondary ports of a DACT.
See DH-60769.
NFS-320-RB:
Replacement board with central processing unit
NOTE: Keypad must be removed before shipping old unit out
for repair.
NFS-320-RBC-FR:
Replacement board with central process-
ing unit, Canadian French.
NOTE: Keypad must be removed
before shipping old unit out for repair.
NOTE:
For other options including compatibility with retrofit equip-
ment, refer to the panel's installation manual, the SLC manual (for
