Honeywell Notifier DVC-AO Product Installation Sheet Download Page 1

Page: 1 / 4

ECN12-0027

1 Product Overview

This Product Installation Sheet describes how to install the DVC-AO Interface Module to the DVC and the DA
Modules.

The DVC-AO Interface Module filters out the buzzing tone occurring when the Audio Outputs are not active.

WARNING:

Remove all power sources to the Fire Panel before installing the DVC-AO

Interface Module. Leave the external and main power OFF until installation of the DVC-AO
Interface Module is complete.

2 Installation

2.1 Mounting

Fix the supplied DVC-AO Spacers

(#GEN-01-002)

to the CHS bracket

Figure 2-1 – Affixing Spacers to CHS Bracket

9 Columbia Way

Baulkham Hills, NSW 2153

PH 02-9894-1444 • FAX 02-9894-4193

www.notifier.com

ASY-02-035 DVC-AO Interface Module

Product Installation Sheet

DOC-03-050

ECN12-0027

04/06/2012 Rev:

1.00

Summary of Contents for Notifier DVC-AO

Page 2: ...ottom of the CHS Bracket 3 Rotate the DVC AO Interface Module PCA 01 066 so that the board holes align with the Spacers GEN 01 002 Figure 2 2 Rotating DVC AO Interface Module in to position 4 Secure the DVC AO Interface Module PCA 01 066 to the CHS bracket using the supplied screws GEN 01 001 Figure 2 3 Securing DVC AO Interface Module ...