ID3000/ID2000 Fire Panel Configuration Tool Manual
Loop Devices
3 - 4
997-291, Version 3.05
November 2010
‘Swap Loops’ Function
The loop devices of one loop can be
transferred, or swapped, very easily with the
content of another detection loop. Simply
highlight the desired loop from which the
devices are to be swapped and press the right-
hand mouse button (if you select all the loop
devices the option is still available). The ‘Swap
Loops...’ option is available for selection.
You will then be prompted for the destination
loop. In this example, the panel has four loops
and the content of loop 2 may be swapped
with the content of loops 1, 3 or 4.
In the example illustrated loop 3 is the chosen
destination. Having selected the loop, you are
then asked to confirm the selection.
Note:
This function is also selectable from the
Edit menu.
Quick Edit Function
Many device properties can be edited simply
by clicking in the appropriate column of the
device to be edited and just enter the new
value. In the example at left, an M720 module
is being moved from addresses 6 and 7 to 23
and 24 (any subsequent addresses are moved
automatically).
Click in column and type new value